Constraint effects in waterproof tunnels analysed with non-linear material in SOFiSTiK
Practical experiences at the Fornebu metro line
Date: Wednesday, November 09, 2022
Time: CET 10:00 am - 11:00 am (Central European Time) 09:00 am - 10:00 am (British Time)
If you register for the webinar, you will receive a link to the recording afterwards, even if you were unable to attend.
This webinar is about the Lysaker Station of Fornebu Metro Line calculation undertaken by COWI AS, Oslo. Raul Rodriguez will discuss the project and the challenges faced during the design. The constraint effects due to shrinkage are usually approached by simplified rules from experience or formulas from the standards, which provide a minimum reinforcement to control the cracking. These approaches are not adequate nor optimal when facing complex geometries, which are also affected by other loads, such as high water pressure. This was the motivation to approach the problem of the constraint effects by using area models in Sofistik with a non-linear material.
Introduction of the project of Fornebu metro line (Lysaker station)
Constraint effects combined with high water pressure. Motivation to find a global approach
Typical tunnel section: Calculation in transversal and longitudinal directions
Description of the analysis of the constraint effects by using a non-linear material in CSM/ASE (SOFiSTiK)
Verification of the cracking width based on this analysis